Every year, monsoon arrives, and the battle to keep your outdoor chairs, bags, and other stuff under plastic bags to save them from getting wet begins. But the scenario is different with the outdoor electrical appliances. You try all your might to keep your HOW TO PROTECT OUTDOOR EXTENSION CORD FROM RAIN DIY from getting soaked up, but nothing works.

Tired of looking for ways to waterproof your extension cord?

Then leave the stress behind and try out our favorite and most used DIY methods to protect your extension cords throughout the rainy season.

Can You Leave Outdoor Extension Cords Outside?

Some electrophobic people ask, “Can you leave outdoor extension cords outside?

Yes, you can because the outdoor extension cords are meant to be used outside or for rugged use.

But what you shouldn’t be doing is using the indoor extension cords outside because they will result in a breakdown, shock, fire, and sparkling.

Aside from this, even outdoor extension cords should be used with utter care. Do not leave them unattended or unchecked for weeks.

Yes, it is weatherproof, but that does not mean it will last forever!

If it gets soaked in the rain, it will get corroded, and you will probably have to buy a new one. So in practice, it will most likely stay in good condition, if you check it regularly before use.

WATER IS NOT THE ONLY THREAT HERE!

Some other dangers include abrasion, and outlet damage, animal bites, and sometimes even a vehicle rolling over then can damage the wire.

Now, let’s know whether it is safe to use an outdoor extension cord in rain.

OUTDOOR EXTENSION CORD USAGE

Many people wonder, “Can you use an outdoor extension cord in the rain?

Extension cords are used outdoors all the time in the years, be it around the holidays or in the rainy season. However, some people don’t know the pitfalls and dangers of extension cords. If people don’t handle it with caution, then it can cost them their life.  So we are here to inform and address those who are planning to use it in the monsoon. Of course, extension cords are great for using outdoors, but it can be dangerous if it gets damaged.

Use of outdoor extension cord to:

  • Run power from the garage to the outdoors light
  • Christmas lights
  • Run electric yard tools
  • Recharge yard tool batteries
  • Run security cameras
  • Run temporary light

KNOW WHAT MAKES THEM DANGEROUS FOR US!

The extension cords can lead to short circuits and much more serious if they are exposed to extreme elements like rain, snow, as well as heat.

To minimize the threat, regular inspection for not only outdoor but also indoor extension cords is a must. Keep an eye on the wire running through the house to prevent the risk of fire or electric shock.

Also, it is necessary to get a handy extension cord cover to protect the area where the two cords meet.

Rest is all good!

After reading the dangers, we are sure that you got some determination to use an outdoor extension cord in the rain with care.

Now, let’s get to the main topic!

HOW TO PROTECT OUTDOOR EXTENSION CORD FROM RAIN DIY?

  • Method: 1 Contain It With A Plastic Container!

Wanna keep the extension cords dry and plugged-in tightly?

Then, try the plastic container hack!

Yes, a plastic jar or container idea never goes out of style.

HOW TO PROTECT OUTDOOR EXTENSION CORD FROM RAIN DIY
HOW TO PROTECT OUTDOOR EXTENSION CORD FROM RAIN DIY

You can now create your very own shield by getting these listed materials below:

  • Plastic container
  • Driller
  • Utility knife
  • Tape or silicon
  • Wire

Now, that you have got all the materials you need, what else are you waiting for?

Check out our easy steps mentioned below and get to work:

Step 1: If you don’t have any empty plastic containers at home, then buy one! But if you do have some empty containers, no need to purchase new ones.

Make sure to pick a strong plastic container that lasts long.

Step 2: Now, drill two holes at each end of the plastic container to slide in the wire. Once done, check if the hole is neither too small nor too big to fit in the extension cord.

It should be properly cut to suck in the wire. If the hole is too big, it will let other elements like water and dust enter the container.

Step 3: Grab a utility knife and be extra careful while cutting up the holes as needed.

Step 4: Now, spread the plastic apart to let the plug inside the container.

Step 5: When you complete the above step, put the top back on.

Step 6: To finish it up, tape the sliced part with the tape for extra protection.

And you are done!

Some Pro Tips To Keep In Mind:

  • Never, we repeat, never use metal tape to stick the ends for this method.
  • Ensure your cord is plugged inside the container to keep it protected from humid and wet weather.
  • It is completely fine if the plastic container is not air-tight. Such a level of protection would do just fine. Moreover, it will not only keep the power chords dry and off the ground but also let your electricity working throughout the rainy season.

We are sure that this trick will come in handy if you have more outdoor extension cords, probably under wet surfaces like docks, where the lawn sprinkler pump sits, or during the rainy or winter season.

Now, let’s jump on to the next method.

  • Method 2: Go Green And Use A Plastic Bag!

Check out the materials you will need for this DIY project below:

  • Plastic bag
  • Tape or silicon

Step 1: Take or purchase a good-quality plastic bag that can survive in a humid climate or monsoon season.

Step 2: Start covering the wire and the entire extension power cord together with the plastic back.

Step 3: If needed, you can use two plastic bags to cover the extension cord.

Step 4: Once finished, place them at any place above the ground you want.

And your work is done!

We guarantee you it will keep water away from the cords.

  • Method 3: Get Cling Wraps To Keep You From Getting Fried!

Using an extension cord outside is a scary thing for all of us, isn’t it? But for our dear readers, we have come up with a pretty great solution! For this method, all you need is an industrial-strength pallet wrap. Pallet wrapping is an awesome way to weatherize your connections. By following the below steps, you can use extension cords anywhere outside you want.

Step 1: Use the best quality pallet wrap. If you don’t have it, you can get it easily from any home improvement store.

Step 2: Now, wrap it slowly yet tightly to the connection portion of the cords as needed.

Step 3: Make sure to put at least five layers of the wraps from top to bottom to prevent electric shock and keep out the water.

Want to know one neat thing about this method?

This method is not only an effective standalone method but also be used in tandem with the other methods mentioned in this read.

Interesting, right?

How Do You Waterproof Outdoor Extension Cords

Many people don’t have a budget and often ask, “How do you waterproof outdoor extension cords without spending too much one money?”

So for them, we might have a cheap alternative in the next method to keep their extension cords from getting wet.

  • Method 4: Go For Smart, Easy, And Cheap Bottle Method!

First of all, you will need to go to your kitchen and grab yourself:

  • A big empty plastic bottle or 2-liter soda bottle
  • Pair of scissors or box cutter
  • Utility knife

The plastic bottle method is not only good for monsoons but also for the winter season. It can cover all your extension cords without letting even a drop of water inside the bottle.

Below are the instructions:

Step 1: Take the utility knife and cut the empty bottle about half-way in between the bottle. Make sure the cut is only 1/4″ around the bottle.

Step 2: In the second step, grab the scissors and create a round hole at the end of the cut. The hole will keep the extension cord fixated in one place.

Step 3: Then, slide the plugs and connections safely inside the plastic bottle. After doing so, the cords will be left hanging out of the round holes.

That’s it! You are done!

By following these three easy and simple steps, you will surely get desired results. If you don’t have a plastic bottle, then an old milk plastic bottle or margarine/butter tub will work fine as well.

  • Method 5: Try PVC Pipes And End-Caps Method!

Materials you will need:

  • 1.5″ pipe
  • 2″ pipe 
  • End caps
  • Rotary tool or hacksaw or grinder

PVC pipes and end-cap method is yet another genius way to lock out the water and keep your wires and connections protected from the elements like water.

This method will require more time and few tools, so you will have to take a day off from your work to begin this DIY.

Nonetheless, this project is effective.

The Design And Purpose:

  • Reduce the risk of theft
  • Stop intentional disconnects
  • Prevent accidental disconnects
  • Weather protection

Step 1: Get the extension cord you will be using for this project.

Step 2: Use the connected cords to size up the pipe you need.

Step 3: Bring drill bits bigger than the power cords

Step 4: Now, measure the length of connected cords. Make sure to leave some extra room around 7″ inside the large pipe. Your smaller cords/plugs don’t need as much length.

Step 5: Next, cut pipes to desired length and sand down the rough edges to smooth. You must do this to avoid it from cutting and ruining your cord.

Step 6: Time to prepare the end caps! So drill the hole in the end cap. Make sure it is bigger than the cord.

Step 7: Then, draw lines from the hole to the edge and repeat downsides.

Step 8: Now, cut the drawn lines with a grinder, hacksaw, rotary tool, or any tool you want. Then, smooth the edges to prevent the cord from damage.

Step 9: Put the extension cord in the pipe and close it with the end caps. To slide the zip ties, drill a hole through both sides of the pipe and cap. (Make sure you are doing this after removing the extension cord.)

Step 10: Now, put the cord back through the cap and take a final walkthrough of how it might look.

Step 11: Seal it with the zip ties to lock the end pipe onto the pipe tightly.

HOW TO PROTECT OUTDOOR EXTENSION CORD FROM RAIN DIY
HOW TO PROTECT OUTDOOR EXTENSION CORD FROM RAIN DIY

So this is how to protect outdoor extension cord from rain!

Things To Keep In Mind While Working:

  • Make sure to go for bigger pipes if your plugs don’t fit the smaller ones.
  • To avoid any confusion, label the pipes to understand which pipe goes on which end.
  • Method 6: Worry Less About Rain By Using The Bucket Method!

Materials will need:

  • Two big buckets
  • Some bricks to hold
  • A shovel

Step 1: Make sure to use good quality and strong plastic buckets for this project.

Step 2: First of all, you have to take bucket one and place it in the ground. Make sure to place it upside down.

Step 3: Now, set the part of the connected extension cords on the top of the bucket. If it does not stay still, then you can tape it.

Step 3: Next, get the second bucket and slide the opening face down on the first bucket to seal the extension wire.

Step 4: If your region is too windy, you can either dig a tight-fitting hole around the first bucket and place the second bucket, or else you can use bricks to support them. Make sure to push the first bucket deep into the mud as needed.

So now, it can rain all it wants without getting your extension cord wet during the monsoon. But if it gets windy, it might tip it over so, block it with some extra blocks.

Let’s move forward to another simple yet brilliant solution!

  • Method 7: Rubber Is A Number One Power Cord Protector!

Things you will need:

  • A rubber
  • Non-inflatable inner tube or inner tube of a bicycle
  • Electrical tape (optional)

Below, we have mentioned the simple steps for this DIY project:

Step 1: You can use a non-inflatable inner tube, but an inner tube of a bicycle will work just fine.

Step 2: Then, cut one end of the inner tube.

Step 3: Now, slide the extension cord inside carefully.

Step 4: Next, cover the tube, and cut off the other end of the inner tube after sliding it through.

Step 5: we suggest you use electrical tape to secure the inner tube to the extension cord.

Now you are good to go!

THE DO’S AND DON’TS OF CREATING A DIY TO PROTECT YOUR EXTENSION BOARD

You might be using certain ways to protect the extension cords that can be wrong, or you might be missing a few hacks to add to your list to ensure safety.

So here are some dos and don’ts you need to follow while placing the extension power cords outside your home:

Feedback Don’ts:

1.If your cord is short and cannot reach the outlet, install a new outlet or move the device closer to the location. It has to be done to ensure safety around the environment, especially if you have kids at home. If you have any doubt about the length of the cord, then do not use them.
2.Stop using the extension cord if there is a slit in insulated rubber or plastic covering, or you can see its internal wires coming out.
3.Avoid using the extension cords through doorways, windows, and other openings to ensure there is no fire hazard.
4.Do not tack the power cords using staplers and nails on walls or onto the surfaces because it might get you electrocuted.
5.Don’t keep the extension wire under furniture or rugs.
6.Don’t install extension power cords if there is proper electric wiring. Always keep them hidden in holes, walls, ceilings, and floors.

If you are following these above-mentioned don’ts, then give a pat to yourself on the back!

Now, let’s talk about what things you should do if you want to protect the extension cord.

Feedback Dos:

1.Using an extension cord is great, but it should be used as a temporary source of power.
2.Make sure the cords are completely plugged in when in use. Once everything is ready, attach the wires to the device.
3.Get one safe multiple outlet extension cord to power various electronic appliances.
4.After you are done using the extension cord, make sure to coil it in a kids-free, safe and dry location.
5.Before using the extension cord, do not forget to inspect it carefully. Showing lethargy might put you or somebody else’s life in danger.
6.Make sure all the equipment has the mark of testing in the lab.
7.Remove the extension cord out of the outlet to unplug.

One can use extension cords for various purposes, such as gardens, back lawns, festivals, and much more. But always keep one thing in your mind – keep them dry and follow all the instructions.

CONCLUSION

Make sure to follow the above guidelines and protect the extension cord to avoid any injuries or accidents. Checking the cords regularly will hardly take a few minutes. If you liked one of our DIY ideas, then do try it now. And next time, when your friend is dealing with the same situation and asks, “How do you protect outdoor outlets from rain?” Then forward this article to them and tell them to try any of our creative ideas as well to protect your extension cords! 

Read More: How to Make Lip Scrub Without Honey

LEAVE A REPLY

Please enter your comment!
Please enter your name here