HOW TO REMOVE STAIN FROM WOOD FURNITURE?
You were having a family dinner, and your niece just spilled oily food on the wooden table. Your inner self cries for help because you will have to buy a new dining table. HOW TO REMOVE STAIN FROM WOOD FURNITURE? But what if we tell you that you can fix it overnight and restore any old piece of your furniture?
We know that you are dying to know about removing the dark oily stains from the wood. So, without wasting your single minute, let’s find out some quick solutions for you.
HOW TO REMOVE STAIN FROM WOOD FURNITURE AND OTHER WOODEN THINGS.
- Things You will need:
- Clean cloths
- Rubber or chemical resistant gloves
- Bicarbonate of soda
- White vinegar
- Baking soda
- Chemical wood stain stripper or homemade wood stain remover
- Safety glasses
- Respirator mask
- Natural bristle paintbrush
- Plastic scraper
- Steel wool
- Medium grit sandpaper
- Fine grit sandpaper
- Electric hand sander
REMOVING STUBBORN STAINS FROM WOOD: 11 EASY STEPS
Wondering, “How do you remove oil-based stain from wood?” or “How to tackle oily stain marks?” Then, your solution is right below!
- Step 1: Create your own oil-based stain remover!
If you are making your own clean homemade degreaser, you will need baking soda, castile soap, and white vinegar.
Pour three cups of warm water, one-eighth teaspoon of Castile soap, one cup of distilled white vinegar, and one tablespoon of baking soda into a spray bottle.
- Step 2: Prepare your work area!
Things will get pretty messy, so before we start the DIY project, it is best to prepare the work area.
We also want to alert you that many wood strippers contain harmful chemicals that should not be touched and dangerous to breathe.
Have kids at home?
Then, it is better to take your work outdoors!
If the wood is not movable or too large, do not forget to ventilate the room and open all the doors and windows. Lastly, lay down a cloth to protect your tiles or ground.
- Step 3: Organize the tools and materials!
From a plastic scraper, stripper to a paintbrush, make sure you have got what you need. Place the tools and materials somewhere safe where you can easily reach them.
A tip for those using a chemical stripper:
Before opening the chemical stripper, read the manufacturer’s instructions and see if they recommend any protective gear to wear before it is put to use.
- Step 4: Protect yourself!
Do not forget to put on protective clothing like safety glasses, chemical-resistant gloves, closed-toe shoes, long pants, and long sleeve shirts.
Finally, put on a respirator to breathe in non-toxic air. While opening the stripper, make sure to protect your eyes and skin.
- Step 5: Prepare the wood surface!
Once done with the previous steps, it is time to prepare the wood surface for the stain-stripping.
Before applying the clean homemade degreaser, make sure to remove the debris and dirt with the scrapper. Then, wash it with soapy water and dry it with a soakable cloth.
- Step 6: Pour the stripper into a smaller container!
Those who are using homemade cleaner can skip this step.
If you are using a chemical product instead of a homemade cleaner, pour it in a metal bowl or an aluminum pan. These two metals are the best containers that can hold corrosive solvents.
Now, pour the chemical stripper carefully in the container without spilling them on your hands, cloth, or the floor.
- Step 7: Apply a thick layer of a stripper or spray the homemade cleaner!
Spray the clean homemade degreaser or dip the brush in the container to soak in the chemical stain stripper and apply a thick layer on the oil-stained wood.
Carefully brush or spray it across the wooden surface until all the stained surface is covered. Make sure to add a thicker and even layer of the chemical stripper or the spray to let the products do their magic.
If you are confused, then you can apply the chemical stripper as directed in the instruction manual.
A small tip: If you are working on the large furniture, start stripping off the stain from the smaller area first.
- Step 8: Let the ingredients soak in!
Give 15 to 20 minutes to the homemade stripper or the chemical product to soak in the wood. Or else you can follow the specific timing instructions given in the chemical product.
Keep an eye on the stained area every few minutes. If in case the stained area becomes dry, apply more stripper.
Here reapplication is necessary to ensure the wooden surface doesn’t dry out.
- Step 9: Time to scrape the stain stripper off the wood!
By this time, the product or your DIY stain remover will make the surface swell or bubble up.
That’s the signal mate! Get your plastic scraper ready for this step.
Scrap off the stain and varnish with the plastic scraper. Begin the work from the edge by gently pushing the scraper on the stained surface in a straight line.
Repeat the same in the different areas until all the layers of debris and residue stain stripper get removed from the wooden surface.
- Step 10: Give a good wipe down to the surface!
If the stain layer does not fall, you can use a steel wool pad to scrub off the oil-stained areas.
All you gotta do is dip the steel wool pad in the liquid or spray the DIY stain remover. While scraping or scrubbing, go along with the grain of the wood.
Do not forget to scrub every nook and cranny of the oil-stained surface. If you feel satisfied, take a clean wet rag and wipe down the surface, to remove the remaining stain or debris.
Now, be patient and let the wooden surface dry for 24 hours away from direct sunlight to work its magic.
- Step 11: Sand the surface!
Many people wonder, “Can you remove stain from wood by sanding with medium-grit sandpaper alone?”
Well, no! The sanding procedure will be of no use if you don’t follow the above steps.
So before you begin this step, make sure the wood is completely dry. If you are working on the larger areas, you can use an electric hand sander.
Repeat this step on all dried areas to remove the traces of the stain and the varnish. As you continue the process, you will be surprised to see the results.
You will soon notice the raw and fresh wood beneath exposed, which will give life back to the wood.
Once you are satisfied, you can finish the work by smoothening out the scratches with fine-grit sandpaper for the best results.
Lastly, wipe the surface of the wood with a clean damp cloth to get rid of wood dust. Now, your brand new wooden surface is ready to use again!
FREQUENTLY ASKED QUESTIONS
1. What Is The Best Way To Remove Stain From Wood?
The best way to remove an oily stain is by using bicarb and vinegar on wood. This recipe can also work on other spots like dye and pasta stains. But if it does not, then making a toothpaste-like consistency by using baking soda and a few drops of vinegar might solve your problem.
2. How Do You Remove Dark Stains From Wood?
Are dark stubborn stains ruining your wood furniture?
Then, don’t worry because we have got you covered!
To stop the dark stain from penetrating, soak a clean cloth in hydrogen peroxide and dab it directly on the dark spots. Make sure to keep it overnight to see the results.
If the dark spots are large, dab a towel in hydrogen peroxide and leave the towel for a few hours.
Once you do this, you will surely be amazed the next day!
3. What Would You Use To Clean Hardwood Cabinets In The Kitchen?
To clean stains like chocolate, syrup, or other stains from natural wood cabinets, make a thick paste of salt and vinegar and dip a brush or steel wool into it. Then, slowly scrub it on the stained area and rinse it with clean water.
You can also use a wet sponge and baking soda to clean the dark spots on the wooden cabinet. Lastly, dry it with a clean cloth.
So now, you know how to clean the dark or oily stains from wood. Once you complete all the steps, you can finish it with a protective layer of wood polish. The best way to remove these cling spots is not to get them in the first place, so protect the precious wood at any cost!
Good luck with your DIY project!